background image

About this Guide

About this Guide

This installation guide is meant for anyone who needs to physically install a SafePace Guardian Standalone 
Camera System. It covers the following topics:

»

Deciding where and how to install your SafePace Guardian Standalone Camera System

»

Mounting the camera, radar and (optional) illuminator

»

Connecting the camera and (optional) illuminator to the external radar

»

Pointing the camera

N

OTE

As your SafePace Guardian Standalone Camera System could include any one of several 

different radar signs, the installation of the radar sign is described in the radar sign installation manual 
included with the sign.

Documentation Conventions

This document uses the following formatting conventions:

Format

Description

Bold Gray

 

Used in procedures to indicate menu commands, interface controls 
and dialog box options.

Italics

Used to place emphasis on certain words.

Monospace text

Used for code samples and any information that the user enters.

Italicized 
monospace text

Used to indicate text that you should replace with your own. For 
example: In the Save As text box, enter c:

\filename.ext

 where 

filename.ext

 is the name of the file you want to save.

>

Used to indicate a sequence of commands (and sub commands) to be 
carried out in the displayed order. For example

 File > Exit 

means to 

open the File menu then choose the Exit command. This applies to 
menus from the main menu bar, context menus that appear when you 
right-click on the interface, and tiles in a tiled interface.

 

N

OTE

Notes are used as reminders or to provide information of interest that supplements or 

emphasizes important points of the main text.

T

IP

Tips are used to suggest alternative methods,  workarounds and/or shortcuts that are not essential 

but that you may find useful in a given situation.

C

AUTION

Cautions are used to advise users of specific actions that could result in a loss of data.

W

ARNING

Warnings are used to advise users of specific actions that could result in personal physical 

injury or damage to equipment.

SafePace® Guardian Standalone Camera Installation
Guide

p. 6

Содержание SAFEPACE GUARDIAN STANDALONE CAMERA






















Отзывы: