Mounting the Camera
Mounting the Camera
You can mount the camera either above or below the external radar head. We recommend that you mount
the camera below the external radar head as this leads to better images for your tickets. However, if the
possibility of vandalism is an issue, we recommend that you mount the camera above the external radar
head, as long as it is not more than 4 meters above the roadbed.
The camera comes with a Pole Banding Mounting system. As this is a standard type of mounting it requires
no special knowledge to easily install the camera.
To install the camera using the pole banding mounting system:
1.
Attach the supplied bracket to the rear of the camera with the supplied screws as shown below.
2.
Insert the stainless steel banding straps into the bracket and fasten the camera to the pole.
N
OTE
:
The banding straps included are long enough for use with a 5-inch pole. If you want to use a
larger pole, you will need to obtain longer banding straps.
3.
Tighten the straps with a nut driver until secure.
W
ARNING
:
Though the installation shown above uses only one banding strap, we strongly recommend
that you use two banding straps when you install your camera.
SafePace® Guardian Standalone Camera Installation
Guide
p. 13
