Traffic Logix SAFEPACE Guardian Awareness, Руководство по установке

Страница: 23 / 32

Connecting the Camera to the Sign
Connecting the Camera to the Sign
The Guardian camera has two cables that you need to connect to the radar sign. There is a power cable
through which the camera draws power from the sign. And there is an Ethernet cable for data transfer
between the sign and camera.
Figure 18: Guardian camera with cables
W
ARNING
:
The radar sign has two power cables which are used to provide power to the camera and the
(optional) illuminator. Make sure that you do NOT connect these two power connectors to each other
as this could cause irreparable damage to the sign, as well as lead to personal injury.
To connect the camera to the sign:
1.
Connect the camera's power connector to the matching power connector from the sign.
A
.
Align the camera and sign power connectors.
B
.
Insert the camera connector into the sign power connector.
C
.
When they are properly inserted, screw the cover on the camera connector over the joint. Be
careful not to over-tighten it.
SafePace® Guardian Trailer Installation Guide p. 23