8
2014-2015 Copyright Traffic Logix® Corp. SafePace® 700 Variable Message Radar Speed Sign
Installation Manual V. 1.1
Power options
The SafePace® 700 radar signs can be powered in several ways:
AC power (standard model)
AC powered signs are equipped to accept 100-240 volts AC. The incoming AC power is converted to 12
volt DC to power the sign. For these signs the regulated power supply comes already pre-wired, and
your sign is ready to operate once it is mounted and wired to the incoming power supply.
WARNING
:
ELECTRICAL SHOCK HAZARD
To avoid serious injury or even death, all electrical wiring should be performed by a
qualified and professional electrician in accordance with local electrical codes.
Mishandling of electrical wiring may also result in damage to the unit which may
void product warranty.
Figure 8, AC Power Converter and Fuse Breaker
The
Line
(
BLACK
) and Neutral (WHITE) wires of the incoming power supply should be connected to the
marked terminals.
The
GROUND
wire (usually
GREEN
), should be connected to the GREEN/YELLOW terminal (see Figure 6
above).
