13
2014-2015 Copyright Traffic Logix® Corp. SafePace® 700 Variable Message Radar Speed Sign
Installation Manual V. 1.1
Turning the Sign ON and OFF
There is no ON/OFF switch installed in the sign. The sign will, rather, immediately power on once the
power source is connected and the fuse breakers are closed. All fuse breakers should be closed when
the sign is in operation. The solar panel breaker need not be closed to power the sign (assuming there is
enough charge in the batteries alone to power the sign); the open breaker, though, will prevent the
batteries from being recharged by the solar panel. To turn the sign off, simply open both the fuse
breaker for the batteries and the solar panel on the solar/battery models and the fuse breaker on the AC
models.
Operating your sign
Once mounted (vertically or horizontally) and powered, your
sign can be connected to with Bluetooth or Wi-Fi, and easily
programmed and managed or scheduled with our easy to use
software.
Depending where the sign has been shipped, your sign has been pre-programmed
to display speeds measured in kilometres or miles. The sign features a MUTCD
compliant radar speed display with two rows of LEDs for text and graphics and
extra-large 18" digits displaying vehicle speed.
Choose any message, graphic, or animated text using the standard library
provided or create your own library of custom messages to upload and
display.
For more information on operating and programming your sign, please refer to the SafePace® Pro User
Manual.
*Get the latest version at:
http://trafficlogix.com/customerarea/customerdownloads
Maintaining your sign
Replacing key internal sign components
The SafePace® 700 radar speed sign are comprised of the following key electronic components (and
respective quantities):
•
Controller Card (1)
•
Radar Head (1)
•
Battery (1) + Solar charger (1) - for signs powered by solar with rechargeable battery
•
AC Power convertor (1) - for AC powered sign configuration
•
Speed Violator Strobe PCB (2)
