22
HOPPER CLEAN-OUT
Your Traeger® Grill has a hopper clean-out system that allows you to remove pellets from the pellet hopper or quickly
change from one pellet flavor to another without making a mess.
375
Shut Down
Cycle
High
Power
OFF
ON
1
3
2
4
PLUG APPEARANCE MAY VARY BY REGION.
Turn the main power switch to OFF (
O
) and disconnect
the power cord. If the grill is still hot, allow it to cool
completely.
Unscrew the clean-out door fastener and open it. Pellets
will empty into the Pellet Bin you've placed below. You
might need a spatula or spoon to push the remaining
pellets out of the hopper.
Once the hopper is empty, close the clean-out door,
replace the fastener, and refill the hopper with your
preferred flavor of TRAEGER® BRAND HARDWOOD
PELLETS.
Place the Pellet Bin (purchased separately) to hold the
unused pellets under the pellet hopper clean-out door.
WARNING!
Do not
empty out the hopper until grill
has completely cooled, otherwise pellets may be very hot.
TIP:
A clean 5-gallon (19-liter) bucket also works great!
