pbCTflk lkbW AppbMBiv fkpTorCTflkp
MlrkTfkd Teb ibdpW
NF `arefully lay the drill on its back on a nonJabrasive surfaceK
koteW
qhe eopper L
Burner Assembly EPNF will be mounted to the drillI but is not shown in the diagram
below for clarityK
OF rse the
Black
BoltsI tashers and kuts Esee aetail “A”F supplied in the eardware hit
ENRMF to install the `aster iegs ENOQF on the left end of the drill and the theel iegs
ENOVF on the right end as shown in the diagram belowK qhe Acorn kuts ENPRF on the
theel iegs ENOVF should go toward the center of the drillK
ieave the kuts loose
during this stepK
PF pet the drill upright to level and then tighten all kutsK
