INTRODUCTION
Congratulations on your purchase of this TRAEGER COM190. With proper
set-up, operation, and maintenance, this grill will provide years of service.
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
TO ASSEMBLE THIS UNIT
Your new grill model COM190 COMMERCIAL comes almost completely
assembled. You will need to complete the assembly process, which includes:
1)
Install
tires
(24)
2) Install trailer tongue (14)
3) Covering the drip pans (6) with tin foil
and setting them in place over the baffle pan (7)
NOTE: NUMERALS FOLLOWING PART NAMES THROUGHOUT THIS
MANUAL REFER TO THE COMPONENT DIAGRAM ON THE
PREVIOUS PAGE.
When you uncrate your new grill, make sure you have the following parts.
(1 ) One bag of nuts, washers, and bolts.
(2 ) Tires (24)
(1 ) Trailer tongue
(4 ) Porcelain Grills (5).
(2 ) Baffle Pans (7)
(4 ) Grease drip pans (6)
(2 ) Grease buckets (10)
(4 ) Firepot covers.
Follow these step by step instructions and you'll be cooking in no time at all.
TOOLS REQUIRED FOR ASSEMBLY:
(2) 3/4" open end wrenches or 3/4" ratchet set
(1) tire iron or lug bolt wrench
(1) claw hammer
(1) vise grips
(1) screw gun with 1/4 inch driver
NOTE: THE ASSEMBLY OF THE COM190 IS A
TWO PERSON OPERATION
