APR-22
Product Code: 2059T
Made in China to TQB Brands Pty Ltd specifications
Page 7
Visit us at www.tqbbrands.com.au
Pivots and pins in all manual pump and release mechanisms [marked X] should be lubricated with a
Light Bearing Grease or 30/40W Machine Oil to ensure long life and prevent premature wear.
Wheel axles and Castor ball races should be lubricated with a Light Bearing Grease or 30/40W
Machine Oil to ensure long life and prevent premature wear.
Cradle Pins, Pivots and Threaded Adjustor Rods [marked X] should be lubricated with a Light Bearing
Grease or 30/40W Machine Oil to ensure long life and prevent premature wear.
If the transmission lifter has been exposed to rain, snow, sand, or grit it must be cleaned before it is stored or used.
Periodically check the piston rod for signs of rust or corrosion. Clean exposed areas with a clean oiled cloth.
WARNING: Never use sandpaper or abrasive material on these surfaces.
8.
SERVICE & REPAIR
Any Transmission Lifter found damaged in any way or found to be worn or operates abnormally it should be removed from
service until repaired by an authorised service agent. Owners and / or operators should be aware that repair of this product
may require specialised equipment and knowledge. Only authorised parts, labels, decals shall be used on this equipment.
Annual inspection of the transmission lifter is recommended and can be made by an authorised repair facility to ensure that
your equipment is in optimum condition and that the equipment has the correct decals and safety labels specified by the
manufacturer.
