02/21
Product Code: 1055T
Made in China to TQB Brands Pty Ltd Specifications
Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES
The
TradeQuip "Made for the Trade"
Wheel/Tyre Lifter is characterized by a pair of laterally spaced lifting arms that raise
and lower in unison and are so, arranged as to contact the vehicle tyre at two areas on its circumference to raise or lower a
wheel/tyre combination for the purpose of removing, transporting, and replacing
wheel and tyre combinations. The lifter’s
drive screw can be activated by an air or battery-operated impact gun from the top of the unit in a vertical position or through
a gear box in a horizontal position if installed. The intent of the lifter is to remove risk of back or other injury to technicians.
2.
ASSEMBLY
PLEASE REFER TO THE EXPLODED VIEW DRAWING IN THIS MANUAL IN ORDER TO IDENTIFY PARTS.
1.
Activate the locks on the locking caster wheels so the lifter will not move during the assembly procedures.
2.
The lifter can be activated directly from the top of the (#5) main upright assembly or the (#1) -optional gear box assembly
can be attached to the top of the (#5) main upright assembly with the four (#2) screws, (#3) lock washers and (#4)
washers, in order to operate the lifter from the side.
3.
Assemble the (#5) main upright assembly to the (#21) base frame with the (#6) screws, (#18) lock washers and (#19)
washers as shown in the drawing. Do not tighten hardware at this time.
4.
Attach one end of the (#11) main steering handle to the (#5) main upright assembly and the other end of the main steering
handle to the (#21) base frame with the (#12) screws, (#3) lock washers and (#4) washers. Do not tighten hardware at
this time.
5.
Tighten hardware mentioned in step 2 first and then tighten hardware mentioned in step 3.
6.
Fit the (#15) lift arm assembly over the top of the (#5) main upright assembly and (#11) main steering handle. Continue
to lower the lift arm assembly until its mounting pad holes align with the holes in the raising/lowering pad on the front
of the (#5) main upright assembly. Secure the two assemblies together with the (#17) screws, (#18) lock washers and
(#19) washers provided.
7.
Secure the (#14) socket for tyre hold to the (#15) lift arm assembly with the three (#16) screws, (#18) lock washers and
(#19) washers as shown in the exploded view drawing.
8.
Slide the (#10) tyre hold upright in the (#14) socket for tyre hold and secure them together by threading the (#9) knob in
the socket for tyre hold until tight. Slide the (#13) tyre hold in the (#10) tyre hold upright and secure them together by
threading the (#9) knob in the tyre hold upright until tight.
9.
Secure the (#8) handle and (#7) tool tray to the (#5) main upright assembly as shown in the exploded view drawing.
3.
BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as cracked joints and damaged, loose,
or missing parts.
The owner and or user must have an understanding of the manufacturers operating instructions and warnings before using
this product. Personnel involved in the use and operation of equipment shall be careful, competent, trained and qualified in
the safe operation of the equipment and its proper use when servicing motor vehicles and their components. Warning
information should be emphasised and
understood. If the operator is not fluent in English, the manufacturer’s instructions
and warnings shall be
read to and discussed with the operator in the operator’s
native language by the purchaser/owner making sure that the
operator comprehends its contents.
Owner and or user must study and maintain for future reference these manufacturer’s instructions. Owner
and or user is
responsible for ensuring all warning labels and instruction manuals remain legible and intact. Replacement labels and
literature are available from the manufacturer.
