Model DUMPTR-3 Dump Truck Bed
Revised 1/17/2015
4 of 5
Assembly (continued)
Step 1:
Ensure there is enough room to lay out all parts. Carefully unpack all parts and hard-
ware and check that everything is present and undamaged. It is helpful to have more than
one person available for assembly.
Step 2
: Loosely fasten side assemblies [A] to shelf rear [D] and shelf front [C] using lag bolts
[F] and flat washers [G], (3) lag bolts per side with a washer on each lag bolt.
Do not yet
fully tighten lag bolts.
Step 3:
Fasten shelf [E] to shelf front section [C] and shelf rear section [D] using (18) screws
[H].
