Model DUMPTR-3 Dump Truck Bed
Revised 1/17/2015
3 of 5
Care and Maintenance
●
Check all fasteners periodically for tightness.
●
Clean the surface using a slightly damp cloth if necessary. Do not use any corrosive
cleaning products or abrasives that may degrade or damage the surface. Furniture polish
may be used to clean dust off the surface.
●
We recommend that any cleaning materials first be tested on a surface that would not be
visible during the course of normal use.
●
Lift slightly when moving on carpet or rough surface to avoid bending or damaging the
supporting structure of the bed.
●
Use of a vaporizer close to bed may cause the surface to swell and the surface to peel.
●
Check the mattress periodically and when changing sheets to ensure mattress is tight
against headboard.
Assembly
Hardware notes:
do not fully tighten any fasteners until all hardware is in place. Failure to
follow these instructions may cause fasteners to misalign during assembly. If using power tools
to aid in assembly, use caution. Power tools may over-tighten fasteners and split or damage
the material.
Tools required (not included):
Phillips head screw driver
7/16” wrench or adjustable wrench
Parts List:
Part #: Quantity: Description:
Reference image only (not to scale):
[A]
(2)
Side assembly
[B]
(11)
Mattress support bar
[C]
(1)
Shelf front section
[D]
(1)
Shelf rear section
[E]
(1)
Shelf
[shelf is flat, thin sheet]
[F]
(6)
¼” Lag bolt
[G]
(6)
¼” Metal flat washer
[H]
(40)
Screw
