TRADEair MCFRC227, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 21

8
Preparations before first use
Before using your TRADEair Compressor, follow these steps:
1. Remove all packing materials and any protective plastic bags, zip-tie labels or tags from the compressor cylinder
head or oil plug.
2. Be sure the air filter is attached to the cylinder head.
3. Make sure the drain valve under the air tank is closed.
4. ADD OIL TO THE CRANKCASE . Oil has NOT been supplied in your air compressor. The oil level should be in the
center of the oil sight gauge on the pump. Use proper compressor oil only. See figure 1 below.
Figure 1. Oil level indicator
NOTICE
The machine should never be run without the correct level of oil in the sump of the pump. The oil provides
lubrication to the cylinder rings which deliver the compressed air. Severe damage to the internal moving
parts can occur if there is not adequate oil flow. Check the oil level frequently, and change the oil on a
regular schedule.