--------------------------------------------------------------------------------------------------------------
INITIAL STARTUP
•
Ensure the unit is stable in a well-ventilated dry position.
•
Ensure that the drain valve is closed and all air outlets are closed.
Connect the power lead to the mains.
•
Start the compressor by pulling on the red knob.
•
Check for air leaks
Note:
Output fittings may differ from those shown
Warning
: Use the red knob to turn the unit on and off, not the mains switch. Turning the unit on
and off from the mains only will result in damage to the motor
Turn on
Turn off
Tank gauge
Regulator gauge
Pressure regulator
Air outlet
Safety valve
