TracVision HD7, Руководство по установке

Страница: 8 / 35

8
Remove the Service Hatch and Radome
Follow the steps below to remove the service
hatch and radome.
a. Using a #2 Phillips screwdriver, remove the
eleven M4 screws securing the service hatch
to the antenna’s baseplate (see Figure 9 ). Set
the hatch aside in a safe place.
b. Using a #2 Phillips screwdriver, remove the
eight #10-32 Phillips screws securing the
radome to the baseplate (see Figure 10 ).
c. Carefully lift the radome straight up off the
antenna. Then set it aside in a safe place.
TIP: If you keep the radome topside, secure it with a
lanyard to prevent it from falling overboard.
Remove the Hatch and Radome
Figure 9 Service Hatch Screws
Figure 10 Radome Screws
M4 Screw (x11)
Service Hatch
Baseplate
#10-32
Screw (x8)
Radome
6