TracVision HD7, Руководство по установке

Страница: 20 / 35

20
Network Connection Options
Choose one of the options below to enable a
network connection.
NOTE: You can find the IP address assigned to the
ACU in the View Wi-Fi Settings and View Enet
Settings menus (see
Figure 33 ).
• Connect to the vessel’s onboard network
using the ACU’s Ethernet port
• Connect to the vessel’s onboard network
using the ACU’s built-in WiFi antenna
Default Ethernet Settings
The ACU’s Ethernet port is set up as a DHCP
client; the vessel’s router can automatically
assign an IP address when connected to the
ACU’s Ethernet port. In this case, you will need
to connect your PC to the network, or use an
existing PC connected to the network, to access
the ACU’s web interface.
If there is no Ethernet network onboard the
vessel, and/or no DHCP server is on the
network, the ACU will assign itself an IP address
that begins with 169.254 (i.e. 169.254.x.x). In this
case, you can connect your PC directly to the
ACU’s Ethernet port. If your PC is configured for
automatic IP assignment by default, it should
also assign a similar IP address on the same IP
network.
Default WiFi Settings
The ACU’s WiFi adapter is configured for an ad-
hoc connection, with security disabled. This
allows you to connect a PC directly to the ACU
via its wireless antenna.
If you wish to connect the ACU to the vessel’s
onboard network using the WiFi connection, set
the ACU’s WiFi State to “Infrastructure” at the
ACU’s System Settings>Wi-Fi Settings menu.
Continued
Connect the ACU to the Network
Figure 33 Viewing Network Settings on the ACU
CONTROL UNIT MENU CHANGE ACCEPT EXIT
ANTENNA
POWER
®
T R A C K I N G S A T S
D I R E C T V 9 9 / 1 0 1 / 1 0 3
Press Next until
Displays:
State, Gateway, Subnet Mask
Displays:
State, SSID, IP Address,
Gateway, Subnet Mask, Security
A B O U T S Y S T E M ?
N E X T Y E S
V I E W W I - F I S E T T I N G S ?
N E X T Y E S
V I E W E N E T S E T T I N G S ?
N E X T Y E S
V I E W S E R I A L N U M B E R S ?
N E X T Y E S
14