Single TracVision A5/M3 12V Receiver
•
DO NOT disconnect the short cable that connects
from one jack to another on the receiver’s rear
panel. The system will not work if this cable is
removed.
•
You can connect the receiver to the entertainment
system using one of the following options:
Option 1 - RCA-type A/V jacks
(use bottom row)
Option 2 - S-Video jack
Option 3 - RF coaxial connector
•
Standard audio/video (A/V) cables with RCA-
type connectors are included with the receiver.
•
Be sure to tighten all connections adequately.
•
Before you connect the power wires, be sure to
read the important guidelines provided in the
Installation Guide
(included with the system)
.
Connector
Function
Vehicle Power
Connect to input power (+12 VDC);
applies to a vehicle or a vessel
RF Remote Input
Connect to RF converter
VHF Antenna In
Not applicable for satellite TV; can
be used for over-the-air channels if
you have a TV tuner & VHF antenna
To KVH Antenna
Connect to the TracVision antenna
Diagnostics Ports,
Technician’s use only, for
Phone Jack
diagnostics purposes
Audio R,
Connect right (R) and left (L)
Audio L
outputs to your audio component
Out to TV Tuner
Connect to your TV if it only has an
RF (coaxial) connector and built-in
TV tuner
Video
Connect to your TV if it has
standard RCA-type A/V jacks
(better picture quality)
S-Video
Connect to your TV if it has an
S-Video input (best picture quality)
54-0287
A.5
System Wiring Diagrams
TracVision A5/M3 12V Receiver Rear Panel Connections