Two Generic (Non-A5/M3) Receivers
– M3 Marine Use Only
•
If you wish to connect two generic (non-A5/M3)
receivers to the system, you will need a Multiple
AC Receivers Add-on Kit (KVH part number
72-0181). This kit includes a splitter, a dual-
output destacker, connecting cables, and
instructions.
•
The output of the TracVision antenna is a special
stacked signal, which the TracVision A5/M3 12V
receiver is configured to decode. However, all
generic (non-A5/M3) receivers are configured to
decode unstacked signals instead. Therefore, a
dual-output destacker is needed to convert the
antenna’s stacked signal into an unstacked signal
that a generic (non-A5/M3) receiver can decode.
54-0287
A.13
System Wiring Diagrams
The TracVision M3 is compatible with all
new DIRECTV receiver models
manufactured today (when wired in the
configuration shown on the previous page).
Older receiver models may function
differently, however, and KVH does not
support their use.
