54-0287
A.3
System Wiring Diagrams
Appendix A
System Wiring Diagrams
The diagrams on the following pages show how to
wire the system for various configurations:
Original TracVision A5/M3 12V receiver* AND:
Total # receivers:
Requires Kit P/N:
See page:
No additional receivers
1
N/A
A.4
One (1) additional TracVision A5/M3 12V receiver**
2
02-1340
A.6
Two (2) additional TracVision A5/M3 12V receivers**
3
02-1340 (x2)
A.8
One (1) generic (non-A5/M3) receiver
– M3 use only
2
72-0182
A.10
Two (2) generic (non-A5/M3) receivers
– M3 use only
3
72-0181
A.12
Three (3) or more receivers of any type
– M3 use only
4+
72-0181 & 19-0123
A.14
* The original TracVision A5/M3 12V receiver (supplied with the TracVision A5/M3 system) is required in all configurations. This receiver supplies
power to the antenna.
** If you connect a
non-
A5/M3 TracVision 12V receiver for DIRECTV service (KVH P/N 02-1442), treat it as a generic receiver.
For complete system wiring details, refer to the installation instructions provided with the system or
upgrade kit. Before making any wiring changes, be sure to turn off vehicle/vessel power.
