13
EN
6
Press “TARE”. The display indicates ‘_--_’ then “PASS” for
2 seconds.
7
Configuring the adjustment date: the display indicates ‘XX.XX’
(YY.MM). When the first digit flashes, press “HOLD/UNITS” to
select the digit. Press “TARE” to go to the next digit. Continue
in the same way to complete the adjustment date.
8
Press “TARE” to exit the date configuration mode; the display
indicates “END”.
9
Wait for the device to switch off automatically.
10
The adjustment procedure is complete.
6.
Prohibited use
The following are forbidden:
•
Using the product for commercial transactions.
•
Using the product in a personnel lifting line without first carrying
out a specific risk analysis.
•
Modifying the product.
•
Using the product beyond its SWL with static or dynamic forces.
•
Arc welding with the product in the ground circuit.
•
Exposing the product to any electric and/or electromagnetic shock.
•
Disassembling or opening the product.
•
Using the product if there is a risk that it may be subjected to
compressive, bending or torsional loads.
•
Preventing the product being aligned in the line of force.
•
Using the product in a highly corrosive environment.
•
Using the product in an explosive environment.
•
Using the product outside the temperature range of -10°C to 50°C.
•
Using the product if it has been subjected to a force above 120%
of its SWL.
•
Before use, failing to observe the stabilisation time (20-30 minutes)
of the product after a sudden change in temperature.
7.
Maintenance and periodic verification
7.1.
Replacing the batteries
The battery indicator flashes when the batteries are discharged.
Replace the batteries.
•
Using a Phillips screwdriver, remove the battery housing cover.
•
Place the 2 1.5 V “AAA” batteries checking the polarities.
•
Replace the battery housing cover.
Содержание Handifor 100
Страница 3: ...3 daN H kg Ibs Net Gr ON OFF TARE HOLD UNITS A F G B C H E D Fig 2 Fig 3 139975 3 ...
Страница 167: ...167 ...
