11) Grease and install the upper cams. Ensure
that the letter "S" is present when looking at
the jaws (Figure 153).
12) Install the adjusting washers (Pos. 11,
#9826) on the axles (See Figure 154).
13) Install the (3) centering bushings and (2)
distance bushings (Figure 155). Ensure the
longer shoulders are pointed down (Figure
156).
1-11 Installation of the Roller Assembly
1) Install the (2) adjusting washers {pos. 11,
#9826} on the top and bottom of the pressing
roller {pos. 48, #18287} (See Figure 157).
14
Figure 153
Figure 154
Figure 155
Figure 158
Figure 157
Figure 156
NOTE:
After installation of the rollery assembly, the notch
should be away from the spring (on a BSO 500
for 9 mm (3/8”). See Figure 158.
NOTE:
To aid this procedure, please reference the
following technical sheet (T-235, Page 22).
