BCS 100cm Rotary Mower Attachment
Page 10
TWT/100RM/0617
Maintenance Guide
Cutter block discs
The cutter block discs are designed to reduce damage
to a minimum, in the case of light contact, thanks to
the disappearing blades. In case of contact, check for
deformations on the discs, make sure the blade housings
are in good condition. Replace any of these parts if
necessary.
When reassembling the disks, ensure that the blades on
one disk are displaced 90° compared to the blades on the
other disk.
Always check the self-locking nut M10 and replace it,
tightening properly.
For engine maintenance please refer to engine manufacturers manual.
Like all cutting machines, the mower must be kept in good condition in order to perform to its
best ability.
NOTE
: Always remove the mower attachment from the main power unit before working on the
deck.
Never try to straighten a bent blade - always replace it.
Clean the underside of the deck periodically to prevent a build-up of dirt and grass on the
surfaces.
Lubricate the wheels and swivel brackets periodically.
Do not turn the machine on its side for cleaning.
Fig 5/2
