Tracer Zonda, Инструкция по эксплуатации

Страница: 13 / 36

13
Instructions for use
EN
Tracer Zonda
steering wheel
Instructions
for use
10
Tracer Zonda
steering wheel
EN
C. Button layout & function table
Wheel axis
R1 L1
Mini stick/L3
MENU
START
SELECT
D-Pad Sensitivity
–
R3
+
Racing wheel
PS2
PC PS3
Digital Analog
1
2
X X X 3 X
4
Gear shift – L L1 L1 5 L1
Gear shift – R R1 R1 6 R1
– L2 L2 7 L2
+ R2 R2 8 R2
SELECT SELECT SELECT 9 SELECT
START START START 10 START
L3 / L3 11 L3
R3 / R3 12 R3
D-Pad D-Pad D-Pad View hat D-Pad
Wheel axis / L-stick X X Axis L-stick X
Pedal – L
Y Axis
/R2
Pedal – R X X
Y Axis
X/R2
MENU Mode Mode / Menu
Installation
The Racing wheel includes the steering wheel unit and foot pedal unit, it is
quite easy to connect them together. However, first You must switch Your
game cosole off before connecting.
A. Connecting the foot pedal unit to the steering wheel unit.
To simulate the real driving experience, You can use the foot pedal unit to
control the acceleration and braking action. To connect this two unit, simply
plug the male type plug found on the foot pedal unit into the base of the
steering wheel unit.
B. Connecting the Racing wheel to the Game console
Plug the cable from steering wheel unit into the console.
Note: Please ensure that the steering wheel unit is in initial position when
switching on Your game system. If the steering wheel unit is not in teh neutral
position, that position will be deemed the neutral position when switching on
Your game system.
To PS3/PS2
Before connecting the steering wheel to Your game console, You need to turn
off the console. Always connect to the Port 1 for single player mode.
To PC-USB
1. Insert Drive disk in your computer.
2. Click to Drive disk „Setup” to start install the drive program.
3. Follow the on-screen instruction to complete the installation.
4. Plug the USB connector to Your computers USB port.
Note: Windows may prompt You to insert the Windows 95/98/Me/2000
CD-Rom into the computer to install a new device.