Tracer T3 PRO TWS BT, Инструкция по эксплуатации

Страница: 13 / 57

13
Instructions for use
EN
Wireless gaming headset
Tracer T3 PRO TWS BT
the pairing mode. Put the headset back in the charging
box and pick it up again to re-enter the pairing mode..
(2) Open the Bluetooth function menu on the mobile phone,
select: T3 PRO, pairing and connection. When successfully
paired and connected, the left or right ear will hear „connec -
ted”.
4. Pairing guide for left and right headset:
a.Put the two headset back into the charging box, and then
take them out at the same time.(Ensure that the headset is
not connected to the mobile phone or other devices at this
time, turn off the Bluetooth of nearby mobile phones or other
devices).
b.Take the headsetout of the charging box,and both ears
will automatically turn on,accompanied by the prompt sound
„power on”.
c.The left and right ears are automatically paired without any
operation.
d.If you do not hear the”TWS connected”tones,please repeat
the above steps.
e.If there is no sound when the left and right ears are connec -
ted, put the left and right headset back into the charging box
and take them out.After the two headset are connected, they
will automatically connect back to the phone.