1
EP800H Quick Installation Guide
English
(EP800H is the extra handset for EP801 or EP802, when installing the handset, please make
sure to follow the registration procedures of EP801 or EP802)
Handset and Charger Installation (Charger only for EP800H)
1. Plug the transformer end of the Charger AC/DC adaptor into a standard AC
electric power outlet, plug the other end into the “DC In” jack on the back of the
Charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. Fully charge the battery for three hours before use.
6. The phone system is now ready to perform basic functions such as making and
receiving phone calls and intercom calls. No base station or handset
programming is needed for basic operations.
Handset Registration
1. Press
MENU
-7 to enter the registration mode
2. Press and hold the base’s PAGE button for 3 seconds until the In Use LED (white color) lighting up and flashing,
also the base station will emit prompt sound to remind you the base station is in the registration mode.
3. Press handset key “1”, this completes the registration process. The base station will assign a handset ID between
12 and 19 automatically. The assigned ID will be displayed on the handset LCD, indicating successful registration.
Handset features
1.
TALK/FLASH (
)
a. Places or answers a telephone or intercom call
b. Sends a Flash signal to phone line to retrieve a dial tone after the call ends, or
to perform the call waiting feature provided by local phone companies during
a call.
2.
SPEAKERPHONE (
)
Press and hold the key for over 2 second to enable/disable the speakerphone
during incoming, outgoing or intercom call.
3. 2-WAY INTERCOM (
)
a. Places an intercom call to another handset, a group handset (group paging)
or all registered handsets.
b. Intercom calls are digital, full duplex, and are conducted without the
assistance from the base station.
4.
BROADCAST (
)
a. Half duplex broadcasting to handsets for immediate announcement
b. Half duplex broadcasting to base stations
Re
：
Press the
key on the left top corner of handset to activate the
broadcast function.
5.
Left/Right Soft Keys (
)
a. Make menu selection.
