6
Instructions
for use
EN
Aluminium HDD external
enclosure 721 AL
4. Fit the top and bottom plates so that the small pins at the end of
the plates and the studs on the sides of the plates click into the
plastic frame.
5. Screw the plates firmly to the sides of the plastic frame.
Use the enclosed USB cable to connect with the box:
1. Connect the cable’s mini USB connector to the box’s USB port.
2. Connect USB connector to the computer.
3. Turn on the box using the switch on the back of the box.
Installation od Windows 2000/ME/XP/VISTA/7/8 opera
-
ting System
No driver program is necessary. Connect the USB cable to PC.
Click „My computer” and hard disc will appear. Ani con for online
plug should appear on the lower right corner of the status bar (new
hard-disc should be devided into sections with FDISK first, then its
icon will appear normal operation can start after formatting).
Create partition and format
Before beginning, connect uour external HD to PC (the HD should
be mounted into the external enclosure correctly). If Your HD has
been formatted, please skip this chapter.
The following instruction will helpy ou to partition ond format your
HD in the Disk managment of Windows XP. The operation under
Windows VISTA or Win7 is similar.
Caution! The data on your HD will be lost. If You have impor
-
tant data on the HD, please back up the data before beginning
the operation.
