5
Instructions
for use
EN
Aluminium HDD external
enclosure 721 AL
System requirements
Hardware: Your comnputer should have USB port
Solftware: Windows SE/ME/2000/XP/Vista/7/8 (note: CD Driver
only for One touch back up function)
Installation:
1. Remove the box’s top and bottom plates. The easiest way to do
this is to hold the silver frame while carefully „shaking” tje plates off.
2. Connect a hard disk to the SATA connector on the printed circuit
board.
3. Turn over the plastic frame and use the screw provided to secu
-
re the hard disk in place.
Open the enclosure: hold the silver frame and carefully lever the
plate with a screwdriver.
