Instruction
manual
11
Tracer 4TS FHD Crux
EN
Menu interface:
Recording
DVR will automatically enter into default recording mode when switched on, Red
dot on the screen blinks and indicate it is recording. The recording file is saved
in the Micro SD (TF) card. To stop, press OK Button or touch the corresponding
icon on screen or recording ends when car stops, and the Red dot will disappear.
G-Sensor
It is one of the most important functions of a car camera. It is a sensor that evalu
-
ates all the forces that act on the car while driving and maneuvering on the road,
and as a result of road incidents. In a situation where the forces detected by the
sensor are higher than those in normal use, sensor sends a signal to the camera
and blocks the recorded video from being deleted. For example, in the event of
a collision by another car, or a collision while parking, the G-Sensor’s response
automatically saves and blocks the recording. Thanks to this function, we have
irrefutable evidence of who was at fault on the road and what were the circum
-
stances of the event, and thus may be used as possible evidence in a case for
compensation or proving guilt.
Recording setting:
After entering into recording mode, press the setting icon to enter into recording settings:
•
Resolution: 1080P/720P/480P
•
Dual: Off/On
•
Cycle: Off/1Min/3Min/5Min
•
Interval: Off/1ms/2ms/3ms
•
HDR: Off/On
•
Exposure: -3 to +3
•
Motion: Off/On
•
Watermark: Off/On
•
Gravity/G-sensor: Off/Low/Medium/High
