Tracer 1151611, Инструкция по эксплуатации

Страница: 17 / 36

Instructions for use
17
NOTE: Depending on the type of the display, a spacer may not be required.
2b: Bump-out or recessed back display
• Start with the longer screw - hand thread it through a washer, the adapter bracket,
a spacer and into the display as shown below.
• The screw must make at least three full turns and fi t securely inside the mounting
hole. Do not overt tighten.
• If you cannot make three full turns inside the display, select a longer screw from
the pack. Repeat for remaining mounting holes, level brackets and tighten screws.
3. Hanging the TV with brackets onto the wallplate
Warning: At least two quali fi ed persons are required for this operation.
• Loosen the safety screws on the brackets.
• Hook the TV with brackets onto the top of the wall plate as shown in
fi g.3.1.
• Tighten the safety screws on the brackets with an appropriate screwdriver as shown
in fi g.3.1.
Important: Do not let go of the TV until you have made sure it is correctly hooked
and the safety screws are tightened.
fi g. 3.1
wall
wall