Tracer 1151611, Инструкция по эксплуатации

Страница: 16 / 36

Instructions for use
16
Tilting
Wall Mount EN
2a. Flat back displays
• Start with the shortest screw - hand thread it through a washer, the adapter bracket
and into the display as shown below.
• The screw must make at least three full turns and fi t securely inside the mounting
hole. Do not overt tighten.
• If you cannot make three full turns inside the display, select a longer screw. Repeat
for remaining mounting holes, level brackets and tighten screws.
fi g. 2.2
fi g. 2.3 fi g. 2.4