Boat trailering hazards – As a precaution, when the boat is being trailered, the anchor must be secured
inside the boat or tow vehicle. If the anchor were to break free while trailering, it could cause serious damage and/or injury.
Anchoring hazards.
1.
Damage to the winch WILL occur if operator drives boat while anchor is down. Dragging the anchor will damage the winch.
2.
Do not exceed the capacity of the winch. If the circuit breaker halts operation of the winch during retrieval or deployment;
the winch may have been overloaded. The winch Control Unit, located on the winch motor, has an internal circuit breaker
to prevent damage from overload. If tripped, the circuit may be reset at the switch by pressing the RESET button. A second
circuit breaker (or fuse) is to be located at the battery for proper installation.
Entanglement hazards.
1.
Never place any object or tool in the rope spool while retrieving or deploying the anchor. The tool or object could become
tangled in the rope resulting in serious injury and/or damage to the winch.
2.
Do not wear loose fitting clothing, scarves, or neck ties during the operation of the winch. Loose clothing may become
caught in moving parts resulting in injury or death.
3.
Do not operate the winch if any person is near the rope or rope spool.
4.
Do not operate the winch under the influence of drugs and/or alcohol.
Storage and Maintenance – For storage, it is best to disconnect positive wire from battery.
WINCH DESCRIPTION
This drum winch retrieves and deploys anchors using rope and up to 20 feet of optional chain. This anchor winch features power-up,
power-down, Free Fall Down and ON/OFF operation. All operations are located on two control switches. One switch is located on
the Control Unit for easy operation at the winch itself. A second switch may be located at the helm, or anywhere the installer
chooses.
PRODUCT SPECIFICATIONS
TITAN 450™
TITAN 300™
Maximum Rode Weight
(weight of the anchor, line, chain)
60 lbs. (27kg)
60 lbs. (27kg)
Line speeds:
Free-Fall Down
500 FPM (152m)
500 FPM (152m)
Power Down
65 FPM (20m)
70 FPM (21m)
Power Up
55 FPM (17m)
60 FPM (18m)
Winch Dimensions:
Motor at 30 degrees
L 14” x W 15” x H 12”
(35.6cm x 38.1cm x 30.5cm)
L 12.5” x W 13” x H 9”
(31.8cm x 33cm x 24cm)
Motor angled upright
L 10” x W 15” x H 14.5”
(25.4cm x 38.1cm x 36.8cm)
L 10” x W 13” x H 13.5”
(25.4cm x 33cm x 34.3cm)
Other Specifications:
Permanent magnet 1800 watt DC Motor, 12V nominal
Normal operation will use 20-70 amps. Current limited at 120 amps.
Frame, drum, and hardware made from marine grade stainless steel
Sealed 4-gauge battery lead wires 6’ (2m)
Mounting Bolt Pattern (LxW): 4-3/4” (120mm) x 3-1/2” (90mm), 4 bolt staggered
