TQ MB-M10-1, Руководство пользователя

Страница: 15 / 25

User's Manual l MB-M10-1 UM 0100 l © 2016 TQ-Group Page 11
3.5.6 Mini PCIe Socket
The MB-M10-1 supports up to two Mini PCIe cards to extend the functionality of the system.
•
One full-size socket (for 50.95 mm × 30 mm Mini PCIe cards)
o
Supports PCIe ×1 and USB 2.0
o
Micro-SIM card socket on MB-M10-1 for SIM/USIM card for 2G/3G/LTE modem support
•
One half-size socket (for 26.8 mm × 30 mm Mini PCIe cards)
o
Supports PCIe ×1 and USB 2.0
The maximum transfer rates of these interfaces mainly depend on the COM Express™ module used and the connected devices.
3.5.7 mSATA Interfaces
The MB-M10-1 supports an mSATA interface:
•
One mSATA socket for mSATA-SSD
The maximum transfer rate of this interface mainly depends on the COM Express™ module used and the connected device.
3.5.8 Micro SD Card Socket
The MB-M10-1 provides a socket for micro SD cards.
The SDIO signals on COM Express™ modules can also be used as GPIO signals.
Please ensure that the module is configured for SDIO-usage of these pins.
3.5.9 Fan Connector
The MB-M10-1 provides a fan connector.
X17: 5 V fan connector
•
Connector type: Molex 53398-0371
•
Mating connector: e.g. Molex 51021-0300 crimp housing
Table 7: 5 V Fan Connector X17
Illustration 9: 5 V Fan Connector X17
3.5.10 Front Panel Connector
The MB-M10-1 provides a front panel connector to connect an additional Power-Button and a Power-LED.
•
A LED and a 130 Ω series resistor @ 3.3 V is required
•
Connect Anode to Pin 3 and Cathode to Pin 4
•
The LED lights up in S0 State (System is running)
•
The LED is off in S5 State (System is shut down or not powered)
Table 8: Front Panel Connector X10
Illustration 10: Front Panel Connector X10
Pin Signal Remark
1 SENSE Sense input for fan speed
2 PWM_OUT Speed control/power output
3 GND –
Pin Signal Remark
1 PWR_BTN# PWR_BTN
2 GND PWR_BTN
3 SUS_S5# PWRD (3.3 V Level)
4 LED– PWRD_ON_LED– (130 Ω to GND)