User's Manual l MB-COME6-4 UM 0100 l © 2022, TQ-Systems GmbH
Page 10
3.5.1
Power Supply
The MB-COME6-4 requires a single 12 V DC power supply. The supply voltage should not vary more than ±5 %.
X10:
Power-In Connector
−
Connector type:
Phoenix PC4/2-G-7,62
−
Mating connector:
Phoenix PC4/2-ST-7,62 (up to 20 A)
Phoenix PC5/2-ST-7,62 (up to 25 A)
Table 2:
Power-In Connector
Pin
Signal
Remark
1
12 V
max. 25 A, current limit has to be supported from power supply
2
GND
–
Note: Power requirement
The MB-COME6-4 input current is not fused. The user has to ensure that the input current does not exceed the
maximum current of 25 A (300 W).
Additionally the cable diameter has to be selected in correlation to the maximum current.
The mainboard power design is optimized for the new high performance TQMx110EB COM Express™ module.
This module can draw up to 200 W power for 10 seconds at power up.
3.5.2
DisplayPort
The MB-COME6-4 supports three DisplayPort interfaces.
Reference
Naming
Possible Resolution and Datarate
X3
DP2
8k (HBR3)
X4
DP3
8k (HBR3)
X5
DP1
4k (HBR2)