TQ Aviation
KTX2-F.0100
EASA.AP445
MAN
KTX2-F.A-MAN.0001.docx
Page 9 of 74
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
1. General
1.1 Purpose
This manual contains information about the physical, mechanical and electrical characteristics,
installation and operation for the KTX2-F Mode S Transponder. Additionally it describes the ADS-B
functionality for a compliant ADS-B Out installation using Extended Squitter (ES).
1.2 Scope
This manual applies to the operation and installation of the KTX2-F Mode S Transponder.
At the publication date of this manual the software version is 0100 and the FPGA version is 0042. The
software and FPGA versions are subject to change without further notice.
1.3 Terminology
Except where specifically noted, references made to “the Unit” or “the Installation” will apply to the
transponder defined in 1.2.
Referenced Documents where the respective document is identified by document number, document
title and issue.
•
The word MUST in the text denotes a mandatory instruction. A deviation is not permissible.
•
The word SHOULD in the text denotes a recommendation or advice. Such recommendations or
advice is expected to be followed unless good reasons are stated for not doing so.
•
The word MAY in the text denotes a permissible practice or action.
Note: Background information contained in this document is always indicated by using an italic character
font.
1.4 Symbols
DANGER:
Advices whose non-observance can cause radiation damage to the
human body or ignition of combustible materials.
ATTENTION:
Advices whose non-observance can cause damage to the device or
other parts of the equipment or reduce the correct functionality of the
device.
INFORMATION:
Supplemental information for operating the device.
