TQ 295153 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 74

background image

TQ Aviation

KTX2-F.0100

EASA.AP445

MAN

KTX2-F.A-MAN.0001.docx

Page 70 of 74

© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.

8. FCC related issues

8.1 Radiofrequency radiation exposure Information:

This transponder complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transponder should be installed and operated with minimum distance of 200
mm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Notice:

This transponder has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This transponder
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

8.2 Compliance

Notice:

This device complies with Part 15 of the FCC Rules and with Industry Canada license-

exempt RSS standard(s).
Operation is subject to the following two conditions:

(1)

this transponder may not cause harmful interference, and

(2)

this transponder must accept any interference received, including interference that
may cause undesired operation.

8.3 Modifications

Note:

Changes or modifications made to this transponder not expressly approved by TQ-Systems
GmbH may void the FCC authorization to operate this equipment.

«
...
68
69
70
71
72
...
»

Содержание 295153











































































Отзывы:

Нет отзывов

Похожие инструкции для 295153

Бренд: VDO Страницы: 20

Бренд: JBL Страницы: 25

Бренд: Murphy Страницы: 20

Бренд: Philco Страницы: 7

Бренд: NKE Страницы: 8

Бренд: Noxon Страницы: 20

Бренд: Radio Shack Страницы: 16

Бренд: Easy Listener Страницы: 17

Бренд: Konsberg Страницы: 119

Бренд: Cobra Страницы: 35

Бренд: Raytheon Страницы: 96

Бренд: Directechs Страницы: 3

Бренд: Bush Classic Страницы: 32

Cobra CB 29 LX LE

Бренд: Giant Страницы: 6

Бренд: Behringer Страницы: 23

Бренд: Denver Страницы: 14

cNODE Maxi 31 Ex d

Бренд: Kongsberg Страницы: 50

Бренд: Vertex Standard Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды