TQ-Systems HPR50-CHR01-UM, Руководство пользователя

Страница: 3 / 10

EN - 3
1.2 Intended Use
The TQ Charger is intended exclusively for charging the Battery and the
optional Range Extender of the HPR50 drive system and must not be used
for other purposes. The terms Battery or Range Extender refer exclusively to
the original Battery pack included in the scope of delivery of the e-bike or the
optional Range Extender.
Any other use or use that goes beyond this is considered improper and will
result in the loss of the warranty. In case of non-intended use, TQ-Systems
GmbH assumes no liability for any damage that may occur and no warranty
for proper and functional operation of the product.
Intended use also includes observing these instructions and all information
contained therein as well as the information on intended use in the supple-
mentary documents enclosed with the e-bike.
Faultless and safe operation of the product requires proper transport, storage,
installation and operation.
1.3 Safety instructions for the Charger
— Only use the original TQ Charger to charge the Battery and Range
Extender.
— Only use this Charger to charge the original Battery pack included with
the e-bike or the optional original Range Extender.
—
Before each charging process, check that the Charger cable and plug are
not damaged.
—
Do not operate the Charger with a damaged cable or plug. Otherwise
there is a risk of electric shock.
— Never open the Charger. In the event of a fault, have the Charger checked
by an authorized bicycle dealer.
— Protect the Charger from moisture. Otherwise there is a risk of electric
shock.
—
Only operate the Charger in dry rooms.
—
Keep the Charger clean. Contamination could cause an electric shock.
— Do not operate the Charger on easily combustible surfaces (e.g. paper,
textiles, etc.) or in combustible environments. There is a risk of fire due to
the heating of the Charger during charging.
— The Battery and Range Extender must never be charged unattended.