TQ-Systems HPR50-CHR01-UM, Руководство пользователя

Страница: 7 / 10

EN - 7
Optional Range Extender Charging
NOTE
—
When connecting the Charger to the optional Range Extender, it is
checked whether the Range Extender is connected to the charging port
of the Battery in the bike frame. In this case, the drive system is deacti-
vated during the charging process for safety reasons.
—
The charging system detects whether the Range Extender is connected
to the charging port of the Battery in the bicycle frame. In this case,
both are charged, first the integrated Battery and then the optional
Range Extender.
CAUTION
Risk of accident due to activated drive system during charging processgs
► Always connect the Range Extender to the charging port of the Battery
in the bike frame when you have installed the Range Extender on the
bike.
This is the only way to ensure that the drive system is deactivated during
charging. Otherwise, there is a risk that you may start the drive system
during charging and the plugged-in charging cable may cause a fall when
you start driving.
►
Open the cover (item 1 in Fig. 3)
on the charging port of the Range
Extender.
► Check that the contacts in the
charging port (item 2 in Fig. 3)
are free of dirt and clean them if
necessary.
► Insert the charging plug (item 3
in Fig. 3) of the Charger into
the charging port of the Range
Extender.
►
Remove the charging plug of the
Charger from the charging port of
the Range Extender after the charging process is complete.
►
Close the cover on the charging port when charging is complete.
► Disconnect the Charger from the power supply.
Fig. 3: Range Extender charging
1
2
3