13.
Clock Function
13.1
Setting the Clock
1. Select the Clock Set-up menu (
�
F4:Setup
�
F2:Clock
).
2. The display now shows the current date and time. The cursor starts at
the day. For example…
31/12/10 12:00
F1:
�
F2:
�
��
:Set
3. Press the
and
keys until the day is correct.
4. Press
to move to the month. Press the
and
keys until the
month is correct.
5. Press
to move to the year. Press the
and
keys until the year
is correct.
6. Press
to move to the hour. Press the
and
keys until the hour
is correct.
7. Press
to move the cursor to the minutes. Press the
and
keys until the minutes are correct.
8. Check that the date and time are correct.
Press
to save the settings.
If any changes are needed, press the
key to move left to the
desired position.
Press
to quit without resetting the clock.
Notes
1. The
WP-84
does not test for a valid day of the month when setting the
clock (eg: attempting to enter 31/02/10 is not corrected).
2. The
WP-84
does test for leap years.
13.2
Displaying or Hiding the Clock
The
date
and
time
are
normally
displayed
along
with
the
Conductivity
/TDS/Salinity and Temperature readings. Press
in normal
operation to alternatively display or hide the clock.
Page 32