11
10
Press to print readings to the optional A740
printer.
Press to save displayed readings. Data automat-
ically saved in one of 16 locations.
Press to display the minimum reading mea-
sured.
F. Saving Data
During a measurement data can be saved for retrieval later.
Follow these steps.
Press to display the maximum reading mea-
sured.
Press to display saved data. The stored data will
be shown in the main display and the storage
location will be dispalyed on the bottom display.
G. Loading Saved Data
While “EXP” is displayed pressing the
key will cycle
the storage location up and pressing the
key will cycle
the storage location down. This data can be printed also. Please
see section I.
H. MIN / MAX
I. Printing Data (requires A740 printer)
The 665 will display a 10 second countdown giving you time to
align the back holes approximately 4” away from the printer win-
dow. “Out” will display and a 9 second countdown will proceed
while printing takes place. Saved data can be printed also after
loading data as outlined in section H.
J. Changing the Date & Time
1. Activate “EDIT” mode by pressing
2. Press
3. Press
and
to cycle through month, day, and
year.
4. Press
and
to change the month, day or year.
5. Once the date has been changed press
6. Press
and “date” is displayed.
and “date”
is displayed.
and “rtc” will be displayed. Press
7. The lower left display indicates hours, the lower right indi-
cates minutes and the main display indicates seconds.
8. Press
and
to cycle through hours, minutes
and seconds.
9. Press
and
to change the hours, minutes
and seconds.
10. Exit “EDIT” mode by pressing
TPI 665 manual.qxd 11/14/2008 10:36 AM Page 10
www.
.com
1.800.561.8187
