TP TP 235 MOBILE, Руководство пользователя

Страница: 50 / 80

Ó
Copyright 2015
50
User Manual: TP 235 MOBILE / TP 275 MOBILE from date 01.12.2016
10.7 Counterknife
The counterknife in the wood chipper is used by the knife to cut the wood. The counterknife must
have a sharp edge otherwise the wood will bend and the cutting face become frayed. The wood
chipper is equipped with a vertical counterknife in one side of the in-feed and a horizontal
counterknife in the base. The horizontal counterknife has two cutting edges and therefore can be
reversed.
Changing the counterknife
D = 1.5 mm
1. Open the TP EASY SERVICE as described in chapter 7.
2. Remove the bolts (1) that hold the respective counterknife (2, 3) in place.
3. Take out the counterknife (2,3) and reverse/replace.
4. Carefully clean the counterknife (2,3) and contact surface.
5. Re-fit the counterknife (2,3) and adjust the distance between the knife edge and the
counterknife to distance
D using a precision feeler gauge (see illustration above).
6. The bolts in the horizontal (2) and vertical (3) counterknife must be tightened to 110 Nm /
11 KPm Use a torque spanner for this purpose (available as extra equipment).
7. Once the counterknives (2, 3) have been reversed or replaced and all of the bolts (1) have
been tightened, close the TP EASY SERVICE as described in chapter 7.
8. Finally, close the disc housing as described in chapter 7.