background image

37

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject 
to the following two conditions: 
1. This device may not cause interference, and 
2. This device must accept any interference, including interference that may cause 

undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils 
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 
1. l’appareil ne doit pas produire de brouillage; 
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si 

le brouillage est susceptible d’en compromettre le fonctionnement.

Caution:

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce 
the potential for harmful interference to co-channel mobile satellite systems.
The high-power radars are allocated as primary users (i.e. priority users) of the bands 
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference 
and/or damage to LE-LAN devices.

Avertissement:

Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour 
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux 
systèmes de satellites mobiles utilisant les mêmes canaux; 
En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de 
haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour 
les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du 
brouillage et/ou des dommages aux dispositifs LAN-EL. 

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 
20cm between the radiator & your body.

Déclaration d’exposition aux radiations:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies 
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec 
un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B) 

Содержание TL-WPA4530












































Отзывы: