10
Chapter 2
Initial Use
Powerline
Extender TL-WPA4530
Extender TL-WPA4530
2
Join the new powerline extender into the existing powerline
network by Pairing two powerline devices.
a . Press the Pair button on the old powerline extender for 1
second. The Power LED starts blinking.
Note:
If the Power LED does not blink, press again.
b . Within two minutes, press the Pair button on the new
powerline extender for 1 second. The Power LED starts
blinking. When the Powerline LED stays on, the pairing
process is done!
Powerline
Extender TL-WPA4530
Extender TL-WPA4530
3
Relocate the extender to where Wi-Fi is preferred.
Note:
A red Powerline LED indicates poor signal strength, we recommend
another location.
