16
Chapter 3
Configuring via Web Management Interface
powerline extenders on the same powerline network whose Wi-Fi Move feature is also
enabled.
Follow the Steps below to enable Wi-Fi Move feature:
1. Connect to the powerline extender wirelessly. Visit
http://tplinkplc.net
, and log in
with the password you set for the extender.
2. Go to
Wireless
>
Wi-Fi Move
.
3. Toggle
On
to enable the feature.
Note:
When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password; Wireless Security;
Wireless Mode; Wireless Radio Status; Wi-Fi Schedules; LED Schedules; Wi-Fi Clone Settings; MAC Filter Settings;
Parental Controls, Guest Network.
3 4 Wi-Fi Clone
Copy wireless settings from my router to my extender, so I can
use the same SSID and password to access the Internet in my
house.
1
Connect to the powerline extender wirelessly. Visit
http://
tplinkplc.net
, and log in with the password you set for the
extender.
2
Go to
Wireless
>
Wi-Fi Clone
.
3
Select a Wi-Fi band or both to be cloned.
2.4GHz & 5GHz
is
selected by default.
4
Before cloning, make sure your router supports the same
band as your extender. If you do not know how to check this,
go to your router’s User Guide for more information.
5
Plug your extender near your router.
I want to:
How can I
do that?
