36
Chapter 4
Configure the Access Point
4. Select
Allow the stations specified by any enabled entries in the list to access
as the filtering
rule.
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New
and fill in the blank.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC
Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
Enabled
in the Status drop-down list.
4 ) Click
Save
and click
Back
.
7. The configured filtering rules should be listed as the picture shows below.
Now only client A and client B can access your network.
4. 4. 5. Wireless Advanced
The configuration for each operation mode is almost the same, we take Access Point
mode for example here.
1. Visit
, and log in using the password you created.
2. Go to
Wireless
>
Wireless Advanced
.
3. Configure the advanced settings of your wireless network and click
Save
.
Note:
If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
Done!
