7
Chapter 2
Set Up Internet Connection
2. 1. Power On the Extender
Plug the extender into an electrical outlet
near your host router
, and then wait until the
Power LED turns solid on.
Note:
For safety, we suggest that you plug the extender in upright directions as shown below.
Wait until the Power and
Wireless LEDs turns solid on.
2. 2. Set Up the Extender
There are three ways to connect to the host network: via the WPS button, via a web
browser, or via the Tether app.
2. 2. 1. Method 1: Via the WPS Button
Use this way if your router has a WPS button. The button might look like one of these:
.
1. Press the WPS button on your host router, and then press the WPS button on the
extender for 1 second within 2 minutes.
Note:
For more information about using WPS button on your host router, please refer to the router’s user
guide.
2. Wait until the Signal LED changes from blinking to solid on, indicating successful
connection.
Note:
If the LED does not turn solid on, try again or refer to
Method 2: Via the TP-Link Tether App
.
