7
Unmanaged/Easy Smart Rackmountable Switch
Introduction
LED
Indication
PoE Max
On: Total power supply is between 103 W and 110 W. No power may be supplied if
additional PDs are connected.
Flashing: Total power supply is equal to or greater than 110 W.
Off: Total power supply is less than 103 W.
Note: Only for TL-SG1016PE.
On: Total power supply is between 120 W and 126 W. No power may be supplied if
additional PDs are connected.
Flashing: Total power supply is equal to or greater than 126 W.
Off: Total power supply is less than 120 W.
Note: Only for TL-SG1008PE.
On: Total power supply is equal to or greater than 185 W.
Flashing: Total power supply is equal to or greater than 185 W and lasts for more than 2
minutes.
Off: Total power supply is less than 185 W.
Note: Only for TL-SG1218MPE.
FAN
Green: The fan works properly.
Yellow: The fan doesn't work properly.
Note: Only for TL-SG1016PE and TL-SG1218MPE.
Reset
Press this button for five seconds or above to reset the switch back to factory default settings.
Note:
Only TL-SG1016DE/TL-SG1016PE/TL-SG1024DE/TL-SG1218MPE has a Reset button.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10 Mbps, 100 Mbps or 1000 Mbps. For
TL-SG1016PE and TL-SG1008PE, ports 1 to 8 can also provide power for PDs. For TL-SG1218MPE,
ports 1 to 16 can also provide power for PDs.
10/100Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10 Mbps or 100 Mbps.
SFP Port
Designed to install the SFP module. TL-SG1218MPE features 2 individual SFP ports which support
1000M SFP module connection only.
