63
Chapter 11
Administrate Your Network
3
Enable
Remote Management
.
4
Keep the
Port
as the default setting.
5
If you only want to allow one specific device to manage the router, select
Only the
Following IP/MAC
Address
and then enter the
IP Address
or
MAC Address
. If you
want to allow all remote devices can access the router, select
All
.
6
Click
Save
to make the settings effective.
Tips:
1. You can find the WAN IP address of the router on
Basic
>
Network Map
>
Internet
.
2. The router’s WAN IP is usually a dynamic IP. Please refer to
Set Up a Dynamic DNS Service Account
if you want to log
in to the router through a domain name.
11 9 ICMP Ping
ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by
sending ICMP echo request packets to the target remote or local host and waiting for
an ICMP response.
1
Visit
http://tplinkmodem.net
, and log in with the password you set for the router.
2
Click
Advanced
>
System Tools
>
Administration
page. Locate the
ICMP Ping
section.
