TP-Link TD-W8910G, Руководство пользователя

Страница: 81 / 88

TD-W8910G 54M Wireless ADSL2+ Router User Guide
73
Figure 5-76
2. Enter the IP address of the management station permitted to access the local management
services.
3. Click the Save/Apply button to save the IP Address.
4. Enable the Access Control Mode (shown in Figure 5-75).
)
Note:
If Enabled , the Router will permit access to local management services from IP addresses
contained in the Access Control List. If the Access Control mode is Disabled , the function will not
validate, and all IP addresses can access to local management services. The services are the
system applications listed in the Service Control List.
5.7.4.3. Passwords
Choose “ Management ” Æ “ Access Control ” Æ “ Password ”, you can see the screen (shown in
Figure 5-77) which allows you to change the factory default password of the Router.
Figure 5-77
To change the password:
1. Enter the Old Password in the text box.
2. Enter the New Password and Confirm Password . The Confirm Password should be the
same as the New Password.
3. Click the Save/Apply button to make your change take effect.