TD-W8900GB
54M Wireless ADSL2+ Router User Guide
39
Figure 5-25
Setup an Incoming IP Filtering rule:
1. Click
the
Add
button (pop-up Figure 5-25), and then you will set the new rule in the next
screen (shown in Figure 5-26).
Figure 5-26
2. Enter
the
Filter name
for the rule, it is exclusive and must be filled in.
3. Select
Protocol
in the drop-down list, enter
Source IP address
,
Source Subnet Mask
,
Source Port
,
Destination IP address
,
Destination Subnet Mask
, and
Destination Port
for
the rule.
4. Select at least one WAN interfaces displayed below to apply this rule.
5. Click
the
Save/Apply
button to save this entry.
