TD-W8900GB
54M Wireless ADSL2+ Router User Guide
6
3.3 The Back Panel
The Router's ports, where the cables are connected, and RESET button are located on the back
panel.
Figure 3-2
¾
Antenna:
Used for wireless operation and data transmit.
¾
Power:
The Power plug is where you will connect the power adapter.
¾
LAN 1,2,3,4:
Four 10/100Mbps RJ45 LAN ports for connecting the router to the local
PC(s)
¾
Reset Button:
There are two ways to reset the Router's factory defaults:
1) Press the reset button of the Router, and then power on the Router, hold reset button
pressed down for about five seconds,
2) Restore the default setting from “Management
-
Settings
-
Restore Default “of the
Router's Web-based Utility.
¾
Line:
Connect to the Modem Port of Splitter or to the telephone line.
¾
Wireless antenna
3.4 System Requirements
¾
Make sure your computer has a Networking Interface Card (either wired or wireless is ok)
before connecting the Router to your computer.
¾
An operating system supporting the TCP/IP protocol.
¾
Broadband Internet Access (ADSL).
¾
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.
